Advertisement
Quick Links
Operation Manual
SunSun CWF-400 Waterfall Filter
55708
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for SunSun CWF-400
Summary of Contents for SunSun CWF-400
- Page 1 Operation Manual SunSun CWF-400 Waterfall Filter 55708 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 • The filter must not be used underwater! • The filter must be placed at least 2 meters away from the edge of the pond! Technical Data Model CWF-400 Max. capacity ( ⁄ 14.000 ℓ Adapter for inlet hose (mm)
- Page 4 Exploded drawing and parts list № Name № Name Insert Bio ring Plate Fastening nut Bio sponge Gasket Container Inlet Installation 1. For maximum water flow, cut the connection point as shown in the illustration. Ensure that the cut matches the diameter of the water pipe used. Use the largest hose diameter compatible with the pump to achieve the maximum flow rate.
- Page 5 № Name/explanation Outlet Direction Note! Keep the outlet side of the fastening nut horizontal to the left or right to achieve optimal performance. 3. Insert the bio ring and the sponge into the container in sequence. Then, place the plate on top and secure the container at both ends with the clips. Finally, insert the insert (reverse the order for cleaning).
Need help?
Do you have a question about the CWF-400 and is the answer not in the manual?
Questions and answers