Connecting Audio From External Components - Samsung HT-C6730W User Manual

Connections
DIGITAL DIGITAL
AUDIO IN AUDIO IN
OPTICAL
Optical Cable
(not supplied)
Set-Top Box
OPTICAL
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2. Press the FUNCTION button to select D.IN input.
•
The mode switches as follows : BD/DVD
✎
NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output directly to a TV.

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components. This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

This system supports only DTS and Dolby Digital audio, MPEG audio (bitstream) is not supported.
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
•
Be sure to match connector colors.
2. Press the FUNCTION button to select AUX input.
•
The mode switches as follows : BD/DVD
✎
NOTE

You connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the
VCR to this product.
26
English

Connecting Audio from External Components

HDMI IN HDMI IN
HDMI OUT HDMI OUT
LAN LAN COMPONENT OUT COMPONENT OUT
VIDEO OUT VIDEO OUT
Red
White
VCR
AUX
D. IN AUX ONLINE
D. IN AUX ONLINE
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either
left or right.
HDMI 1 HDMI 2 FM
HDMI 1 HDMI 2 FM