Dynamic Range Control; Av Sync; System; Initial Settings - Samsung HT-C6730W User Manual

Dynamic Range Control

You can listen at low volumes but still hear dialog
clearly. This is only active when a Dolby Digital
signal is detected.
•
Off : Turn Dynamic Range Control off.
•
On : Choose to listen to a movie at a lower
volume without losing clarity of dialog.
•
Auto : The Dynamic Range Control is set
automatically based on the information
provided by the Dolby TrueHD Soundtrack.

AV Sync

Video may not sync with the audio when the
product is connected to a digital TV. If this occurs,
adjust the audio delay time to match the video.
•
You can set the audio delay time between
0 msec and 300 msec. Adjust it to the optimal
setting.

System

Initial Settings

By using the Initial Settings, you can set
language, TV aspect, Musical Room Calibration
and Network setting, etc.
For more information on the settings, refer to the
corresponding section in this user manual.

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size.
•
Size 1 : Display smaller application icons. You
may see some black on the sides of the
screen.
•
Size 2 : Display normal application icons.
•
Size 3 : Display larger application icons. The
image may be too large for your TV screen.

Anynet+ (HDMI-CEC)

Anynet+ is a convenient function that offers linked
operations with other Samsung products that
have the Anynet+ feature.
To operate this function, connect this product to
a Samsung TV with an HDMI cable.
You can operate this product using a Samsung
TV remote control and start disc playback simply
by pressing the PLAY (►) button on the TV's
remote control.
For more information, please see the TV user
manual.
•
Off : Anynet+ function is off.
•
On : Anynet+ function is on.
✎
NOTE

This function is not available if the HDMI cable
does not support CEC.

If your Samsung TV has an n logo, then
it supports the Anynet+ function.

Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.

The Anynet+ function is supported only when
an HDMI Cable is connected to the HDMI OUT
of the product.

BD Data Management

Lets you manage the downloaded contents from a Blu-ray
Disc that supports the BD-LIVE service.
You can check the device information including the
storage size, delete the BD data or change the Flash
memory device. Change Device allows you to select either
the product's Internal Memory or External Memory
(connected USB Device). If the data to be stored from
BD-LIVE is greater than the size of the remaining memory
or the Internal Memory is full, connect an External USB
device, then select External Device in the menu.
Settings
Display On-Screen Menu
BD Data Management
Audio Disc Menu
Current Device
System Audio
Total Size
Network Subtitle
Available Size
Language
Delete BD Data
Security
Change Device
General
" Select
Support
:
:
: Internal Flash Memory
:
: 703MB
:
: 703MB
|
: Internal Flash Memory
' Return
37
English