Quick Start - Fishman AURA SIXTEEN User Manual

Quick Start

Power – Install a 9V alkaline or lithium battery (not included).
Set the controls – Volume at minimum, select at #1 and blend at
its mid-point.
Plug in – Use standard ¼-inch shielded instrument cables. Place any
other pedals after Aura Sixteen.
Set trim – Play hard and adjust input trim (right side) so clip/batt LED
fl ashes occasionally.
Select an Image – Raise the volume and audition the 16 Images with
the select knob. Since Aura Sixteen ships with dreadnought Images, it's
important to use a dreadnought style guitar or see page 12 on
downloading Images for your instrument.
Blend to taste – turn left for more pickup and right for more Image.
Kill feedback – If feedback starts, change the position of the phase
switch.
Bypass – Step on the foot switch to alternate between blended Image
sound and dry pickup (this is the default setting).
Mute – To alternate between blended Image sound and mute, hold the
foot switch down until the LED fl ashes. Repeat to return to bypass.
3