Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for IFM ANT512
Summary of Contents for IFM ANT512
- Page 1 Operating instructions RF-identification system ANT512 Read/write head...
-
Page 2: Table Of Contents
ANT512 Contents Preliminary note ............. -
Page 3: Preliminary Note
Warning of damage to property 1.3 Legal and copyright information © All rights reserved by ifm electronic gmbh. No part of these instructions may be reproduced and used without the consent of ifm electronic gmbh. All product names, pictures, companies or other brands used on our pages are the property of the... -
Page 4: Safety Instructions
ANT512 2 Safety instructions General • The unit described is a subcomponent for integration into a system. – The system architect is responsible for the safety of the system. – The system architect undertakes to perform a risk assessment and to create documentation in accordance with legal and normative requirements to be provided to the operator and user of the system. -
Page 5: Intended Use
ANT512 3 Intended use The read/write head reads and writes ID tags without contact. For use, the read/write head must be connected to the DTE10x evaluation unit. The data is converted into digitally coded values and provided to the evaluation unit. -
Page 6: Items Supplied
ANT512 4 Items supplied • Read/write head The device is supplied without installation and connection accessories. Available accessories: www.ifm.com. The optimum function is not ensured when using components from other manufacturers. -
Page 7: Function
ANT512 5 Function 5.1 ID tags ID tags are passively operated without a battery. The energy required for operation is provided by the read/write head. The energy is provided via an inductive coupling. The integrated antenna coil in the read/write head generates a magnetic field which partly penetrates the antenna coil of the ID tag. A voltage is generated by induction that supplies the data carrier with energy. -
Page 8: Installation
ANT512 6 Installation 6.1 Notes on the unit installation When mounting several RFID units adhere to the minimum distances between the systems. Flush mounting of a read/write head in metal reduces the read/write distance. Device performance can be affected if positioned in the immediate vicinity of powerful HF emission sources such as welding transformers or converters. -
Page 9: Alignment Of The Sensing Face
ANT512 Fig. 2: Antenna head separated from the fixing element 1 Sensing face 2 Adjustable antenna head 3 Fixing element 6.4 Alignment of the sensing face u Loosen the screw. u Remove the antenna head from the fixing element and turn it. -
Page 10: Mounting Distances
ANT512 Fig. 3: Non-flush mounting Fig. 4: Flush mounting 6.6 Mounting distances Operating mode Distance side (A) Distance front (B) For reading and writing ≥ 400 mm ≥ 400 mm 6.7 Positioning of the ID tag For installation in or on metal use the ID tags provided for this purpose. - Page 11 ANT512 w The distance “D” is indicated in the data sheet. w All indications apply to static read/write operations. Fig. 5: Position the ID tag...
-
Page 12: Electrical Connection
Connect the unit to a DTE10x evaluation unit via the M12 connector. w Voltage is supplied via the evaluation unit. Pin assignment Wiring DATA Information on available sockets see: www.ifm.com. Cables with the following characteristics are suitable for the connection: Length Ohmic resistance (feed + return line) Effective cable capacity <... -
Page 13: Operating And Display Elements
ANT512 8 Operating and display elements Fig. 6: Light indicators 1 LED green: Operating voltage 2 LED yellow: ID tag State Description green operating voltage OK operating voltage missing flashing slowly deactivated yellow on (permanently) ID tag detected on (pulse) ID tag read/written successfully... -
Page 14: Maintenance, Repair And Disposal
9 Maintenance, repair and disposal The unit is maintenance-free. u Contact ifm in case of malfunction. u Do not open the housing as the unit does not contain any components which can be maintained by the user. The unit must only be repaired by the manufacturer. -
Page 15: Approvals/Standards
ANT512 10 Approvals/standards For approvals and standards, the following information is available: • Test standards and regulations: documentation.ifm.com • EU declaration of conformity and approvals: documentation.ifm.com • Notes relevant for approval: Package insert of the device and documentation.ifm.com... -
Page 16: Glossary
ANT512 Glossary ID tag An ID tag is used to identify objects. A read/ write device is used to read the ID tag via a high-frequency radio signal. An ID tag consists of an antenna, an analogue circuit for receiving and transmitting (transceiver),... - Page 17 ð Funkzulassung Radio approval Agrément radio ANT512 DTAxxx RFID 125 kHz 80308135 / 00 ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen • Germany 11426822 / 00 04 / 2022...
- Page 18 Deutsch Vor Inbetriebnahme die Bedienungsanleitung lesen und während der Einsatzdauer aufbewahren. • Hiermit erklärt die ifm electronic GmbH, dass die Geräte in der folgenden Tabelle der Richtlinie 2014/53/EU entsprechen. • Der vollständige Text der EU-Konformitätserklärung, Technische Daten, Anleitungen, Zulassungen, Kontakte und weitere Informationen unter documentation.ifm.com.
-
Page 19: Great Britain
Read the operating instructions before set-up and keep them for the duration of use. • ifm electronic gmbh hereby declares that the devices indicated in the following table corresponds to the directive 2014/53/EU. • The full text of the EU Declaration of Conformity, technical data, instructions, approvals, contacts and further information is available at documentation.ifm.com. - Page 20 30 dBµA/m @ DTA201, DTA300, DTA301 10 m English ANT512 / DTA100 / DTA101 / DTA200 / DTA201 / DTA300 / DTA301 FCC information: The devices comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
- Page 21 Canada / Canada English ANT512 / DTA100 / DTA101 / DTA200 / DTA201 / DTA300 / DTA301 ISED note: The devices contain licence-exempt transmitters/receivers that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSSs.
- Page 22 ISM radio wave radiated devices. 繁體中文 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅 自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有干擾現 象時，應立即停用，並改善至無干擾時方得繼續使用。 前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻器材須 忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Australia English Use in Australia: Singapore English Complies with IMDA standards. DB 103032 The “Equipment Registration” is available on our website at: documentation.ifm.com...
Need help?
Do you have a question about the ANT512 and is the answer not in the manual?
Questions and answers