Power Management Setup - JETWAY V400DA1A User Manual

Parallel Port Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
SPP/EPP/ECP/ECP+EPP
To operate the onboard parallel port as Standard Parallel Port only, choose "SPP." To operate
the onboard parallel port in the EPP modes simultaneously, choose "EPP."
"ECP", the onboard parallel port will operate in ECP mode only. Choosing "ECP+EPP" will
allow the onboard parallel port to support both the ECP and EPP modes simultaneously. The
ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP
feature. After selecting it, the following message will appear: "ECP Mode Use DMA" at this
time, the user can choose between DMA channels 3 to 1. The onboard parallel port is EPP
Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the
following message will be displayed on the screen: "EPP Mode Select." At this time either
EPP 1.7 spec. or EPP 1.9 spec. can be chosen.

3-8 Power Management Setup

The Power Management Setup allows you to configure your system to most effectively save
energy saving while operating in a manner consistent with your own style of computer use.
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
ACPI Function
Video Off Option
Video off Method
MODEM Use IRQ
Power Button Function
State After Power Failure
> Wake Up Events
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power Management
(ACPI). The settings are Enabled and Disabled.
Video Off Option
This determines the manner in which the monitor is blanked. The choice are Suspend → off,
All Modes → Off, and Always On.
Video Off Method
This determines the manner in which the monitor is blanked.
DPMS (default)
Blank Screen
V/H SYNC+Blank
Power Management Setup
Enabled
Suspend -> off
V/H SYNC+Blank
3
Instant-Off
Auto
Press Enter
F6:Optimized Defaults
Initial display power management signaling.
This option only writes blanks to the video buffer.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
31
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults
By choosing