JETWAY 618AFR5A User Manual page 41

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
ACPI Function
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
> PM Timer Reload Events
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
ACPI Function
This item allows you to Enabled/Disabled the Advanced Configuration and Power
Management (ACPI). The settings are Enabled and Disabled.
Power Management
This category allows you to select the type (or degree) of power saving which is directly
related to the following modes:
1. Suspend Mode
2. HDD Power Down
There are three selections for Power Management, two of which have fixed mode
settings.
Min Saving
Max Saving
User Define(default) Allows you to set each mode individually. When not disabled, each
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off the vertical and
Blank Screen
DPMS (default)
Video Off In Suspend
This determines the manner in which the monitor is blanked. The settings are: Yes and No.
Power Management Setup
Enabled
User Define
DPMS
Yes
Stop Grant
3
Disabled
Disabled
Instant-off
Disabled
Disabled
Disabled
0
0 : 0 : 0
Press Enter
F6:Optimized Defaults F7:Standard Defaults
Minimum power management. Suspend Mode=1 hr., and HDD
Power Down=15 min.
Maximum power management. Suspend Mode=1 min., and HDD
Power Down=1 min.
of the ranges is from 1 min. to 1hr. except for HDD Power Down
that ranges from 1 min. to 15 min. and disable.
horizontal synchronization ports and write blanks to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
38
Item Help
Menu Level >
F1:General Help