Thank you for purchasing the First-Light USA TORQ ™ Tactical Light. Please carefully review this manual prior to use. IMPORTANT – PLEASE READ FIRST The intense white light emitted by the primary white LED may cause temporary blinding, regardless of the brightness level used. Use caution during operation.
SPECIFICATIONS FL1 STANDARD HIGH 10h 45m 116m 3,400cd IPX-4, Water Resistant * Runtime until output drops below 10% of maximum output at this setting.
Page 5
FL1 STANDARD MEDIUM 152h Environmental Specifications Normal Operating Temperatures: (-20°F) to 120°F ● Water Resistant ● Batteries ● (2) AA Batteries...
BATTERY INSTALLATION STEP 1. Open battery door by releasing the latch (as shown below). STEP 2. Insert two AA batteries according to polarity as indicated on the inside of battery door. STEP 3. Close battery door insuring latch is secure.
BASIC FUNCTIONS PRIMARY SECONDARY CONTROL CONTROL LOCK/UNLOCK INDICATOR MOMENTARY CONTROL LOCKOUT/READY MODE The TORQ NV is factory-shipped in ™ PRIMARY / SECONDARY CONTROLS Lockout Mode, a setting for preventing accidental illumination.To unlock the light and enter Ready Mode, press the buttons simultaneously and release.
PRIMARY CONTROL PRIMARY CONTROL BUTTON To turn on the primary (white) LED, press and release the button. To adjust the brightness of the primary LED, from the on position, press and hold the button. Release the button at the desired brightness. To turn off the primary LED, press and release the button.
STROBE MODE SECONDARY CONTROL To turn on the strobe, press and hold button with the base of the thumb, then simultaneously press the button with the front portion of the same thumb. Once the strobe is on, button may be released. NOTE: Strobe Mode can only be activated as a momentary function.
Lock Indicator illuminates. SECONDARY CONTROL IR BEACON MODE The TORQ NV features an integrated IR beacon. To activate from the off position, press and hold the button to turn on IR Beacon. To turn off the IR Beacon, press and release the button .
NV’s head is designed to rotate 320 degrees ™ (160 degrees left or right of forward position). FINGER LOOP The TORQ NV finger loop is adjustable; however, it is not designed to be removed. Removing the finger loop will void the warranty. REMOVABLE SIDE PANELS The TORQ NV comes equipped with removable side panels.
™ be mounted to MOLLE/PALS webbing for hands- free use. To mount the TORQ NV to the TRS MOLLE Mount, insert the dovetail on the TORQ NV’s side panel into the TRS Belt Mount until a “click” is heard to ensure proper seating.
FIRST-LIGHT USA, LLC 2-YEAR LIMITED WARRANTY The PERIOD OF WARRANTY shall be for two years from date of purchase of the lighting device. First-Light USA will repair or replace, free of charge, at First-Light USA’s option, any part due to defects in materials or workmanship. First-Light USA, at First-Light USA’s option, may refund the purchase price to the original owner if unable to make the product perform the work for which it was designed by repair or replacement of a product of at least equal value.
Need help?
Do you have a question about the TORQ NV and is the answer not in the manual?
Questions and answers