Advertisement
Quick Links
Advertisement
Related Manuals for NetComm CF60
Summary of Contents for NetComm CF60
- Page 1 AX11000 Wi-Fi 6E Gateway CF60 DISCOVER WI-FI 6E...
- Page 2 GETTING STARTED...
- Page 3 WELCOME Thanks for choosing a NetComm gateway to power your internet service. We are excited to provide you with a high-performing and reliable internet experience. To get started, please follow the steps contained in this document to set up your gateway.
- Page 4 WHAT’S IN THE BOX...
- Page 5 1 x AX11000 Wi-Fi 1 x Power adapter 6E Gateway (CF60) 1 x Network cable (1m) 1 x Network cable (1m) with yellow plugs with red plugs...
- Page 6 Power button UFB ONT WAN port AX11000 Wi-Fi 6E Gateway Power outlet Power adapter...
- Page 7 CONNECT TO THE INTERNET To connect to the internet, your property will have a network connection point. In most cases, this connection point will be in the form of an nbn™ Connection Box or a UFB Optical Network Terminal (ONT). When your service provider has confirmed that your internet service is active, connect the red 10GE WAN Ethernet port on your AX11000 Wi-Fi 6E Gateway to your premises’...
- Page 9 INDICATOR LIGHTS The lights on the gateway indicate the status as follows: Blinking The gateway is powered on and is initialising. Solid The gateway is powered on and operating normally. Power The gateway is powered off. Solid The gateway is connected to an internet service. Internet The gateway is not connected to the internet.
- Page 10 The Wi-Fi Network Name and Wi-Fi Password are case sensitive TYPE...
- Page 11 CONNECT CLIENT DEVICES VIA WI-FI Ensure your gateway is powered on and connected to the internet. Type the network name and password on the Wi-Fi Security Card into your wireless device or scan the QR code. SCAN...
- Page 13 CONNECT CLIENT DEVICES USING NETWORK CABLE Ensure your gateway is powered on and the Internet indicator light is solid white. Use the included network cable with yellow plugs to connect your wired network equipped devices such as PCs and printers to the yellow LAN ports of the gateway.
- Page 14 CONFIGURING YOUR GATEWAY If your gateway does not provide an internet connection to the connected devices after they are connected, it’s likely that you may need to configure your gateway using the web interface. You will need the following information about your connection from your service provider: - Connection type (Dynamic IP/Static IP).
- Page 15 At the login screen, type admin into the Username field. In the Password field, type the unique password printed on the label on the bottom of the gateway, then select the Login button. Follow the Basic Setup to complete the configuration using the information provided to you by your ISP.
- Page 17 WI-FI / WPS / LIGHTS To turn the Wi-Fi radio off and on, press the Wi-Fi button for three seconds then release. This is a quick way to completely disable/ enable Wi-Fi on your gateway. WPS/LED WiFi To start WPS pairing to connect to a compatible device, press the WPS/LED button for three seconds then release.
- Page 19 TELEPHONE CONNECTION If you are using a telephone, connect the telephone to one of the two RJ11 ports on the rear of the device. Further configuration is required to begin using a telephone service. Contact your Internet Service Provider for assistance. Telephone AX11000 Wi-Fi 6E Gateway...
- Page 20 NetComm Wireless Limited is part of Casa Systems, Inc. Casa Systems, the future of NetComm ANZ HEAD OFFICE SYDNEY Casa Systems Inc. 18-20 Orion Road, Lane Cove NSW 2066, Sydney Australia +61 2 9424 2070 www.netcomm.com CORPORATE HEADQUARTERS ANDOVER Casa Systems Inc.
Need help?
Do you have a question about the CF60 and is the answer not in the manual?
Questions and answers