Page 2
Important Safety instructions WARNING: Adhering to these guidelines is crucial to mitigate the risk of significant injury or even fatality. Please prioritize your safety by strictly following these instructions. Ensure you retain a copy of these guidelines for future reference. Important Usage and Safety Guidelines 1.Installation: Always adhere to the provided installation instructions.
Page 4
Preparation Be sure to remove the cover plate before setting the limits. Opening the cover plate (Before Setting Limits) Pry open the cover plate on the top rail along its edge as shown in the illustration, then remove it. Reattaching the cover plate (After Setting Limits) Reattach the cover plate to its original position, ensuring that no wires are pinched during installation.
Page 5
Exiting Sleep Mode Each battery motor from original manufacturer is factory-preprogrammed and set to "Sleep Mode" before shipping to prevent any unintended operation. Before setup and operation, it's essential to "Wake" the motor. Exiting Sleep Mode To activate the motor from "Sleep Mode", ensure it's properly installed and secured within the mounting hardware.
Page 6
Motor Pairing To select a different remote channel for pairing with the motor(s) later on, follow these steps: SELECTING CHANNEL Within 10 secs Press (2 secs) SECS Within 10 secs of Note:The motor jogs twice.Remote was added successfully。 (2 secs) If the remote is not paired within the allowed time, the motor will exit pairing mode.
Page 7
Automatic Limit Setting NOTE: Each motor is factory preset with limits by trained personnel. If you need to reset the limits, please follow the instructions below. NOTE: If the limits have not been set, the red light will flash three times each time the UP or DOWN button is pressed.
Need help?
Do you have a question about the Premium Skylight Day/Night Cellular Shade Hazel and is the answer not in the manual?
Questions and answers