Page 2
Important Safety instructions WARNING: Adhering to these guidelines is crucial to mitigate the risk of significant injury or even fatality. Please prioritize your safety by strictly following these instructions. Ensure you retain a copy of these guidelines for future reference. Important Usage and Safety Guidelines 1.Installation: Always adhere to the provided installation instructions.
Page 3
1. Remote Overview ..........1 2. Sleep Mode ............2 3. Motor Pairing ............4 4. Reverse Motor Direction (Before Limit Setting) ..5 5. Initial Setup Programming .........6 6. Reverse Motor Direction (After Limit Setting) ..7 7. Adjusting Limits ..........8 ........9 8. Adjusting Motor Speed .........10 9.
Page 5
Sleep Mode Opening the cover plate Pry open the cover plate on the top rail along its edge as shown in the illustration, then remove it. Each battery motor from original manufacturer is factory-preprogrammed and set to "Sleep Mode" before shipping to prevent any unintended operation. Before setup and operation, it's essential to "Wake"...
Page 6
Sleep Mode Reattaching the cover plate Reattach the cover plate to its original position, ensuring that no wires are pinched during installation.
Page 7
Motor Pairing To select a different remote channel for pairing with the motor(s) later on, follow these steps: SELECTING CHANNEL Within 10 secs Press (2 secs) SECS Within 10 secs of Note:The motor jogs twice.Remote was added successfully。 (2 secs) If the remote is not paired within the allowed time, the motor will exit pairing mode.
Page 8
Reverse Motor Direction (Before Limit Setting) Note: This operation is only applicable when the shade limits have not been set. If the direction doesn't match the To verify motor direction, briefly press the UP/DOWN buttons, press and hold both UP or DOWN button. Pause the shade by buttons together until the motor jogs once pressing STOP.
Page 9
Initial Setup Programming Note: Users can choose either automatic or manual methods to set the limits, based on personal preference. 4.1 Automatic Limit Setting ( Set Lower Limit ) (Set Upper Limit ) Press UP to raise the shade. It stops Press DOWN to lower the shade.
Page 10
Reverse Motor Direction (After Limit Setting) To reverse the motor direction after limit setup, follow these steps: Note: the motor jogs once Press the UP and DOWN buttons simultaneously. Press UP + Down Note: the motor jogs once...
Page 11
Adjusting Limits Should you need to modify the preset limits, refer to the following instructions. (Set Upper Limit) (5 secs) (2 secs) Important! Stop the shade before it reaches beyond the desired upper limit. (Set Lower Limit) (5 secs) (2 secs) Important! Stop the shade before it reaches beyond the desired lower limit.
Page 12
Adjusting Motor Speed To modify the motor speed: Ensure a remote is paired with the motor. Proceed with the following instructions to adjust speed. To access speed adjustment settings: Remove the battery cover on the back of the remote. Press the left "P" button. If the motor doesn't respond to speed adjustments, it's already Note: If the motor jogs twice,...
Page 13
Motor P Button Functions Operational control of the motor: runs until it reaches the limit stop Operational control of the motor: runs until it reaches the limit stop Motor is in Red indicator light sleep mode flashes twice SECS Put the motor into smart pairing mode.
Page 14
Recharge The Battery Connect the motor using a USB-C cable for charging. If the red LED light flashes, When charging, A solid green LED light it indicates that the battery the green LED light indicates the battery is is low and needs to be will flash.
Need help?
Do you have a question about the Premium Skylight Cellular Shade Hazel and is the answer not in the manual?
Questions and answers