Grounding Instructions - Panasonic EP30007 - Real Pro ULTRATM Operating Instructions Manual
Household massage lounger
Hide thumbs
Also See for EP30007 - Real Pro ULTRATM:
- Operating instructions manual (36 pages) ,
- Operating instructions manual (54 pages)
Advertisement
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or break down, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not
modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrated in
Figure A. Make sure that the product is connected to an outlet having the same configuration as the plug.
No adapter should be used with this product.
Figure A
GROUNDING PIN
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
4
Advertisement
Need help?
Do you have a question about the EP30007 - Real Pro ULTRATM and is the answer not in the manual?
Questions and answers
Control won't turn on. Any reset?
To reset the Panasonic EP30007 - Real Pro ULTRATM control that won't turn on, follow these steps:
1. Ensure the power cord is connected: Verify that the power cord is properly plugged in.
2. Turn on the power switch: Make sure the unit's power switch is turned on.
3. Wait 5 seconds after a massage finishes: If the control doesn’t respond after a massage, wait at least 5 seconds once all movement has stopped before pressing the button again.
If the issue persists, stop using the unit and inspect the power cord and plug for damage. If needed, contact a qualified technician.
This answer is automatically generated