Advertisement

Quick Links

Instruction Manual
SLE43i
with eTronic 3d flame technology
This product is only suitable for well insulated spaces or occasional use.
To be left with the customer after demonstrating the features of the Solution electric fire.
The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this
manual must be followed to ensure safe operation of the appliance. It should be noted that the requirements and this publication
Nov 2024 - V2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLE43i and is the answer not in the manual?

Questions and answers

Summary of Contents for Solution FIres SLE43i

  • Page 1 Instruction Manual SLE43i with eTronic 3d flame technology This product is only suitable for well insulated spaces or occasional use. To be left with the customer after demonstrating the features of the Solution electric fire. The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this manual must be followed to ensure safe operation of the appliance.
  • Page 2: Table Of Contents

    Correct Disposal of this Product this appliance must not be supplied through an external switching device, such as a timer, or Solution Fires Warranty connected to a circuit that is regularly switched on and off by the utility. � CAUTION: Some parts of this appliance around the heater grill can become very hot and cause burns.
  • Page 3: Installation & Operating Instructions

    Installation & Operating Instructions • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given instruction concerning the use of the appliance in a safe way or are supervised and understand the hazards involved.
  • Page 4: Installation

    Installation Instructions Installation Instructions Fig.4 Installation Installation - Frames 1. Centrally and in-line with the top of the fireplace Capital Fires provide alternative Frames for the appliance. Fitting methods are shown below. opening, drill and plug a hole and fit the eyelet (supplied) in the rear wall of the chamber.
  • Page 5: Technical Data

    Installation Instructions Product Dimensions SLE43i Installation - Frames Continued Fig.12 Frame Style Three Cast Iron Fire Frame 1. Unpack the frame from its packaging. 2. IMPORTANT. Ensure the canopy is removed from Fig.13 the frame. 3. Bend the two tabs at the top of the fire forwards to accept the hooks fitted to the frame.
  • Page 6: Technical Parameters

    Technical Parameters Operational Instructions Information requirements for electric local space heaters Fig.18 Model identifier(s): SLE43i Item Symbol Value Unit Item Unit Type of heat input, for electric storage local space Heat output MANUAL heaters only (select one) ON/OFF SWITCH manual heat charge control, with...
  • Page 7: Target Temperature Setting

    Operation Instructions Operation Instructions NOTE: The unit may emit a slight, harmless odour and smoke when first used. This odour & smoke is Fuel Bed Brightness - Fuel on Handset normal and it is caused by the heating of the internal heater parts and will not occur again. The brightness setting of the fuel bed colour can be adjusted by pressing the fuel bed button to NOTE: The functions below can be controlled by the remote control.
  • Page 8: Thermal Safety Cut-Out

    Thermal Safety Cut-Out Troubleshooting The thermostat reading on the screen does not match the room temperature. (IF IN DOUBT isolate the appliance and seek professional advice) A thermal safety cut-out is incorporated Battery Replacement in the heater to prevent damage due to Remote Control overheating.
  • Page 9: Correct Disposal Of This Product

    To return your used device, please contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Solution Fires Warranty For Warranty information, terms and conditions and to register for an extended Warranty please scan the QR code below.

Table of Contents