Table of Contents
Advertisement
Quick Links
Instruction Manual
SLE40i and SLE41i
with eTronic 3d flame technology
This product is only suitable for well insulated spaces or occasional use.
To be left with the customer after demonstrating the features of the Solution electric fire.
The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this
manual must be followed to ensure safe operation of the appliance. It should be noted that the requirements and this publication
Mar 2023 - V6
Advertisement
Table of Contents
Related Manuals for Solution FIres SLE41i
Summary of Contents for Solution FIres SLE41i
- Page 1 Instruction Manual SLE40i and SLE41i with eTronic 3d flame technology This product is only suitable for well insulated spaces or occasional use. To be left with the customer after demonstrating the features of the Solution electric fire. The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this manual must be followed to ensure safe operation of the appliance.
-
Page 2: Table Of Contents
Correct Disposal of this Product connected to a circuit that is regularly switched on and off by the utility. Solution Fires Warranty � CAUTION: Some parts of this appliance around the heater grill can become very hot and cause Replaceable Parts burns. -
Page 3: Installation & Operating Instructions
(See Fits SLE40i fire) and SLE41i Fig.1) Cast iron Fits SLE40i with The SLE40i and SLE41i are designed to fit secondary frame with canopy with various frames supplied by Capital. canopy removed Fits SLE40i... -
Page 4: Installation
7. As an alternative method of providing stability, it is possible to screw fix the SLE40i to the wall or WHEN FITTING INTO A CAST IRON back panel through the flanges. Take care... - Page 5 Product Dimensions SLE40i and SLE41i Installation - Frames Continued Fig.12 SLE40i SLE41i Frame Style Three - SLE40i only Cast Iron Fire Frame 1. Unpack the frame from its packaging. 2. Ensure the second canopy is removed from the Fig.13 fire. (Fig.3) 3.
- Page 6 Technical Parameters Operational Instructions Information requirements for electric local space heaters Fig.18 Model identifier(s): SLE40i, SLE41i Item Symbol Value Unit Item Unit Type of heat input, for electric storage local space Heat output SLE40i SLE41i heaters only (select one) MANUAL...
-
Page 7: Operation Instructions
Operation Instructions Operation Instructions NOTE: The unit may emit a slight, harmless odour and smoke when first used. This odour & smoke is normal and it is caused by the internal heating of the internal heater parts and will not occur again. Fuel Bed Brightness - Fuel on Handset Fig. -
Page 8: Setting The Time And Day (24 Hour Clock)
Operation Instructions Thermal Safety Cut-Out Setting the Time & Day (24 Hour Clock) 1. Press the Power button to turn the unit on. A thermal safety cut-out is incorporated Fig. 26 Battery Replacement 2. Press & hold the Time Setting button for two seconds in the heater to prevent damage due to Remote Control to display the time &... -
Page 9: Troubleshooting
Solution Fires will send the appropriate component to maintenance advice in the user instructions rectify the fault, free of charge. Nothing in the warranty shall make Solution Fires liable for any Terms & Conditions or special, incidental or consequential damages, injury to... -
Page 10: Replaceable Parts
Exploded View SLE40i Exploded View SLE41i Replaceable Parts Replaceable Parts Description Part Number Description Part Number 2203120 2203120 Fuel Bed Log/Coal 2203031/1705015 Fuel Bed Log/Coal 2203031/1705015 2203316 2203124 2203124 2203123 2203123 2203121 2203121 2203317 2203128 2203128 Display Screen Display Screen... -
Page 11: Wiring Diagram
Wiring Diagram SLE40i and SLE41i Synchronous Motor Rear Log LEDs (SLE40i Only) Fuel Bed LEDs Display Flame Effect LEDs Power Supply Main PCB Board NTC Sensor On/Off Switch (Note, appearance may differ from shown) Thermal Cutout Heating Element Blower Assembly www.solutionfires.co.uk...
Need help?
Do you have a question about the SLE41i and is the answer not in the manual?
Questions and answers