Table of Contents
Advertisement
Quick Links
Instruction Manual SLE35i
with eTronic flame technology
This product is only suitable for well insulated spaces or occasional use.
To be left with the customer after demonstrating the features of the Solution electric fire.
The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this
manual must be followed to ensure safe operation of the appliance. It should be noted that the requirements and this publication
Oct 2024 - V10
Advertisement
Table of Contents
Related Manuals for Solution FIres SLE35i
Summary of Contents for Solution FIres SLE35i
- Page 1 Instruction Manual SLE35i with eTronic flame technology This product is only suitable for well insulated spaces or occasional use. To be left with the customer after demonstrating the features of the Solution electric fire. The complete installation must be carried out in accordance with current Standards and Local Codes. The instructions in this manual must be followed to ensure safe operation of the appliance.
-
Page 2: Table Of Contents
• WARNING: The appliance carries the Warning Symbol indicating that it must not be covered or Solution Fires Warranty has a ‘Do not cover label’. Do not cover or obstruct in any way the heat outlet grille. Overheating will result if the appliance is accidentally covered. -
Page 3: Technical Data
Product Dimensions SLE35i • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given instruction concerning the use of the appliance in a safe way or are supervised and understand the hazards involved. -
Page 4: Technical Parameters
Technical Parameters Operational Instructions Information requirements for electric local space heaters Fig.18 Model identifier(s): SLE35i Item MANUAL Symbol Value Unit Item Unit ON/OFF Type of heat input, for electric storage local space SWITCH Heat output heaters only (select one) manual heat charge control, with... - Page 5 Operation Instructions Operation Instructions NOTE: The unit may emit a slight, harmless odour and smoke when first used. This odour & smoke is Flame Brightness Button - Flame on Handset normal and it is caused by the internal heating of the internal heater parts and will not occur again. The brightness setting of the Flame Picture can also be adjusted by pressing the Brightness button to NOTE: The functions below can be controlled by the remote control.
-
Page 6: Battery Replacement Remote Control
Troubleshooting Remote control functions not working: Thermal Safety Cut-Out • Check batteries. (IF IN DOUBT isolate the appliance and seek professional advice) • Ensure thew handset is pointing towards the fire. The unit does not switch on: • Check the IR receiver and IR transmitter on the Battery Replacement A thermal safety cut-out is incorporated in the fire and remote are not obstructed. -
Page 7: Correct Disposal Of This Product
To return your used device, please contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Solution Fires Warranty For Warranty information, terms and conditions and to register for an extended Warranty please scan the QR code.
Need help?
Do you have a question about the SLE35i and is the answer not in the manual?
Questions and answers