Changing The Input Display; Using The Music Optimizer; Muting The Av Receiver - Onkyo HT-S3500 Instruction Manual

Changing the Input Display

When you connect an -capable Onkyo component, you
must configure the input display so that
properly.
This setting can be done only from the front panel.
1 Press TV/CD, GAME or VCR/DVR.
"TV/CD", "GAME" or "VCR/DVR" appears on the
AV receiver's display.
2
Press and hold down the same button (about
3 seconds) to change the input display.
Repeat this step to select the desired input display.
→
■
TV/CD:
TV/CD DOCK
→
TAPE
■ GAME ↔ DOCK
GAME:
VCR/DVR ↔ DOCK
■
VCR/DVR:
Note
• "DOCK" can be selected for the "TV/CD", "GAME" or
"VCR/DVR" input selector, but not at the same time.
• Enter the appropriate remote control code before using the
remote controller for the first time (➔ page

Using the Music Optimizer

The Music Optimizer function enhances the sound quality
of compressed music files.
can work
1
Press MUSIC OPTIMIZER on the front panel.
The M.Opt indicator lights on the AV receiver's
display.
Tip
• Alternatively, you can use the remote controller's HOME.
• See "Music Optimizer" for more details
50).
(➔ page 47).
En-35
Turning On & Basic Operations

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.
1
Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the AV receiver's display.
Tip
• To unmute, press MUTING again or adjust the volume.
• Muting is automatically cancelled when the AV receiver is
set to standby.