Table of Contents
Advertisement
Figure 29. Connecting the battery cable
Steps
1. Route the battery cable through the routing guides on the battery.
2. Connect the battery cable to the connector on the battery.
3. Turn the battery over and adhere the Mylar to secure the connector to the battery.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
WARNING:
This computer contains a coin-cell battery and requires trained technicians for handling guidance.
NOTE:
Removing the coin-cell battery clears the CMOS settings.
The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
51
Advertisement
Table of Contents
Need help?
Do you have a question about the Inspiron 14 Plus 7441 and is the answer not in the manual?