General; General::remote Program - Red Hat NETWORK SATELLITE 5.1.0 Reference Manual

Appendix C. Probes
• High Execution Time — The highest amount of time in milliseconds that the servlet takes to
execute since the system was started.
• Low Execution Time — The lowest amount of time in milliseconds that the servlet takes to
execute since the system was started.
• Execution Time Moving Average — A moving average of the execution time.
• Execution Time Average — A standard average of the execution time.
• Reload Rate — The number of times the specified servlet is reloaded per minute.
• Invocation Rate — The number of times the specified servlet is invoked per minute.
This probe's transport protocol is User Datagram Protocol (UDP).
Field
SNMP Community String*
SNMP Port*
SNMP Version*
BEA Domain Admin Server
BEA Server Name*
Servlet Name*
Critical Maximum High Execution Time
Warning Maximum High Execution Time
Critical Maximum Execution Time Moving Average
Warning Maximum Execution Time Moving
Average
Table C.8. BEA WebLogic::Servlet settings

4. General

The probes in this section are designed to monitor basic aspects of your systems. When
applying them, ensure their timed thresholds do not exceed the amount of time allotted to the
timeout period. Otherwise, the probe returns an UNKOWN status in all instances of extended
latency, thereby nullifying the thresholds.

4.1. General::Remote Program

The General::Remote Program probe allows you to run any command or script on your system
and obtain a status string. Note that the resulting message will be limited to 1024 bytes.
230
Value
public
161
1
myserver