Red Hat NETWORK SATELLITE 5.1.0 Reference Manual page 219

Issuing Commands
identify a specific user, group, and timeout period, as well as the script itself. Select a date and
time to begin attempting the command, and click the Schedule Remote Command link.
Similarly, you may issue a remote command on multiple systems at once through the System
Set Manager. Select the systems, go to the System Set Manager, click the Misc tab, and
scroll down to the Remote Command section. From there you may run a remote command on
the selected systems at once.
To run a remote command with a package action, schedule the action through the Packages
tab of the System Details page and click Run Remote Command while confirming the action.
Use the radio buttons at the top to determine whether the command should run before or after
the package action, establish the settings for the command, and click Schedule Package
Install/Upgrade.
Note that installing multiple packages that have different remote commands requires scheduling
the installs separately or combining the commands into a single script.
205