Red Hat NETWORK SATELLITE 5.1.0 Reference Manual page 129

partition swap --size=2000
partition pv.01 --size=1000 --grow
volgroup myvg pv.01 logvol / --vgname=myvg --name=rootvol --size=1000 --grow
4.9.3.8. System Details # File Preservation —
If you have previously created a file preservation list, you may include that list as part of the
kickstart. This will prevent the files in that list from being over-written during the installation
process. Refer to Section 4.9.7, "Kickstart # File Preservation —
create a file preservation list.
4.9.3.9. System Details # GPG and SSL —
From this sub-tab, select the GPG keys and/or SSL certificates to be imported to the kickstarted
system during the %post section of the kickstart. For Satellite customers, this list includes the
SSL Certificate used during the installation of the Satellite.
Note
Any GPG key you wish to import to the kickstarted system must be in ASCII
rather than binary format.
4.9.3.10. System Details # Troubleshooting —
From this sub-tab, you can change information that may help with troubleshooting hardware
problems:
Bootloader
For some headless systems, it is better to select the non-graphic LILO bootloader.
Kernel Parameters
Enter kernel parameters here that may help to narrow down the source of hardware issues.
4.9.3.11. Software # Package Groups —
Figure 6.11. Software
Kickstart —
" for information on how to
115