Getting A Config File; Viewing Config Channels - Red Hat NETWORK SATELLITE 5.1.0 Reference Manual

rhncfg-manager list config-channel-14
and observe the following output:
Files in config channel 'config-channel-14' /etc/example-config.txt
/etc/rhn/rhn.conf
You may then wonder where the second version of
of the
/etc/example-config.txt
file in
config-channel-14
is not deployed for this system, although the file still resides in the
config-channel-14
channel. The
rhncfg-client
this system.

2.2. Getting a Config File

To download the most relevant configuration file for the machine, issue the command:
rhncfg-client get /etc/example-config.txt
You should see output resembling:
Deploying /etc/example-config.txt
You may then view the contents of the file with
selected as the most relevant based upon the rank of the config channel containing it. This is
accomplished within the Configuration tab of the System Details page. Refer to
"System Details" for instructions.

2.3. Viewing Config Channels

To view the labels and names of the config channels that apply to the system, issue the
command:
rhncfg-client channels
You should see output resembling:
Config channels: Label Name ----- ---- config-channel-17 config chan 2
config-channel-14 config chan 1
The following table lists the options available for
file in
config-channel-17
. As a result, the version of the configuration file in
command does not list the file because it will not be deployed on
less
/etc/example-config.txt
was higher than that of the same
or another pager. Note that the file is
:
rhncfg-client get
Getting a Config File
went. The rank
Section 4.2.9,
209