Zircon StudSensor Pro LCD Manual

EN
The StudSensor
™
scanning modes:
• STUD SCAN: Locates the edges of
wood and metal studs up to
(19 mm) deep
• DEEPSCAN : Locates the edges of
®
wood and metal studs up to 1
(38 mm) deep
WireWarning detection automatically
®
detects and alerts the user to live AC
wires in STUD SCAN and DEEPSCAN
modes. When AC voltage is detected,
the AC WireWarning
displayed on screen.
Note: This product is intended
only for use with an optimum
voltage range of 110–127 V.
DeepScan, SpotLite, StudSensor, TruCal, WireWarning, and Zircon are registered trademarks or trademarks of Zircon Corporation.
Visit www.zircon.com/support for the most current instructions.
LIMITED 1 YEAR WARRANTY
Zircon Corporation, ("Zircon") warrants this product to be free from
defects in materials and workmanship for one years from the date of
purchase. Any in-warranty defective product returned to Zircon*, freight
prepaid with proof of purchase date and $5.00 to cover postage and
handling, will be repaired or replaced at Zircon's option. This warranty
is limited to the electronic circuitry and original case of the product
and specifically excludes damage caused by abuse, unreasonable use
or neglect. This warranty is in lieu of all other warranties, express or
implied, and no other representations or claims of any nature shall bind
or obligate Zircon. Any implied warranties applicable to this product are
limited to the one year period following its purchase. IN NO EVENT WILL
ZIRCON BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM POSSESSION, USE OR MALFUNCTION OF
THIS PRODUCT.
In accordance with government regulations, you are advised that: (i) some
states do not allow limitations on how long an implied warranty lasts
and/or the exclusion or limitation of incidental or consequential damages,
so the above limitations and/or exclusions may not apply to you, and
StudSensor
Stud Finder
Pro LCD features two
⁄ in.
3
4
⁄
1
2
icon will be
®
Pro LCD
™
Stud Edge Groove
WireWarning
Detection
in.
STUD SCAN
®
Mode
Power
Button
further (ii) this warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Return product freight prepaid with proof of purchase date (dated sales
receipt) and $5.00 to cover postage and handling, to:
Zircon Corporation
*Attn: Returns Department
1580 Dell Avenue
Campbell, CA 95008-6992 USA
Be sure to include your name and return address. Out of warranty service
and repair, where proof of purchase is not provided, shall be returned with
repairs charged C.O.D. Allow 4 to 6 weeks for delivery.
Customer Service, 1-800-245-9265 or 1-408-963-4550
Monday–Friday, 8:00 a.m. to 5:00 p.m. PDT
www.zircon.com • info@zircon.com
©2011 Zircon Corporation • P/N 61298 • Rev B 12/11
®
SpotLite
®
Pointing System
TruCal Icon
®
DEEPSCAN
®
Mode
Mode Switch