Enabling Publishing - Netscape MANAGEMENT SYSTEM 6.2 - ADMINISTRATOR Administrator's Manual

Table 15-16 LdapCRL Rule Configuration Parameters
Parameter
publisher

Enabling Publishing

You can enable just file publishing, or both LDAP and file publishing. You should
enable publishing after setting up publishers, rules, and mappers. Once enabled,
the server will attempt to publish. If you have not set up publishing correctly
before enabling publishing, your results may be undesirable, or the publishing
feature may fail completely.
To enable publishing:
In the navigation tree of the CMS window, select Certificate Manager, and then
1.
select Publishing.
The right pane shows the publishing details necessary for the server to publish
to an LDAP-compliant directory.
To enable publishing to a file only, select Enable Publishing.
2.
To enable LDAP publishing, select both Enable Publishing and Enable Default
3.
LDAP Connection options.
In the Destination section, identify the Directory Server instance.
Host name. Type the fully qualified DNS host name of the Directory Server.
For example:
If you configured the Directory Server for SSL client authenticated
communication, the name you enter here must match the
subject DN of the Directory Server's SSL server certificate. For example, the
host name may look like
Port number. Type the TCP/IP port number on which the Directory Server is
listening to certificate and CRL publishing requests from the Certificate
Manager.
Value
LdapCrlPublisher
.
host1.example.com
corpDirectory.example.com
Enabling Publishing
Description
specifies the publisher used with
this rule.
See "LdapCrlPublisher," on page
630 for details on this publisher.
component in the
CN
.
Chapter 15 Publishing 651