Modifying A Certificate Profile - Netscape MANAGEMENT SYSTEM 6.2 - ADMINISTRATOR Administrator's Manual

• Create any certificate profiles you will need that are not among the pre built
certificate profiles.
• Modify the existing certificate profiles and any certificate profiles you have
created by changing the following:
Changing the defaults set up in the certificate profile, the values of the
parameters set in the defaults, or the constraints associated with the
default to set the content of the issued certificate and the value of that
content.
Changing the constraints set up by changing the value of the parameters in
the constraints.
Changing the authentication method set up for this certificate profile.
Changing the inputs set up by adding or deleting inputs in the certificate
profile thus defining the fields on the input page.
Add or delete the single output.
• Optionally, you can modify existing defaults, constraints, inputs and outputs,
or create new ones using the CMS SDK.

Modifying a Certificate Profile

Note that you cannot edit any certificate profile that has been approved by an
agent. The agent must disapprove or disable the certificate profile before the
administrator can edit that certificate profile.
To add a certificate profile and modify an existing or new certificate profile:
Log in to the CMS window. See "Logging Into the CMS Console" on page 245.
1.
Select the Configuration tab.
2.
In the navigation tree, select the subsystem to which the certificate profile you
3.
want to modify belongs.
Select Certificate Profiles.
4.
The Certificate Profile Instances Management tab appears. It lists configured
certificate profiles.
Setting Up Certificate Profiles
Chapter 10 Certificate Profiles 433