Craftsman CMHT77636 Instruction Manual

CMHT77636
Auto-leveling Wall Laser Stud Sensor · Nivel de láser detector de clavos · Niveau au laser détecteur de montant
www.CRAFTSMAN.com
N599503
ENGLISH
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
SAVE THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE.
• WARNING: Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury.
SAFETY INSTRUCTIONS
DANGER: Laser Radiation, avoid direct eye exposure, serious eye injury can
result.
• Do not operate laser in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
• Use the laser only with the specifically designated batteries. Use of any other
batteries may create risk of fire.
• Store idle laser out of reach of children and other untrained persons. Lasers are
dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one laser, may create a risk of injury when used
on another laser.
• Do not use optical tools such as a telescope or transit to view the laser beam.
Serious eye injury could result.
• Do not place the laser in a position which may cause anyone to intentionally or
unintentionally stare into the laser beam. Serious eye injury could result
• Turn the laser off when it is not in use. Leaving the laser on increases the risk of
staring into the laser beam.
• Repairs and servicing MUST be performed by a qualified repair facility. Repairs
performed by unqualified personnel could result in serious injury.
WARNING: DO NOT DISASSEMBLE THE LASER. There are no user serviceable parts
•
inside. Disassembling the Laser will void all warranties on the product. Do not
modify the product in any way. Modifying the tool may result in Hazardous Laser
Radiation Exposure.
• Do not operate the laser around children or allow children to operate the laser.
Serious eye injury may result.
• Do not remove or deface warning labels. Removing labels increases the risk of
exposure to radiation.
• Position the laser securely. Damage to the laser or serious injury could result if the
laser falls.
CAUTION: Occasionally, pipes and electrical wiring may not be detected by this
•
product. The sensor will not detect hot wires inside metal pipe or metal conduit,
behind metallic wall covering, or behind some plywood or other dense materials.
• CAUTION: Material thickness, type of material, moisture content, and other
variables can affect sensing results. The sensor may detect electric wiring or pipes
in the same manner that studs are detected depending on their location to the wall
SAVE THESE INSTRUCTIONS
G
1
4
7