Red Hat LINUX 7.2 Manual page 99

Section 7.2:Modifying Existing Printers 99
To set the default printer, select the printer from the printer list and click the button on the
Default
toolbar. The default printer icon appears in the first column of the printer list beside the default
printer.
If you want to modify an imported printer's settings, you cannot modify its settings directly. You
must override the printer. You can only override an imported printer that has been imported using the
alchemist libraries. Imported printers have the symbol beside them in the first column of the printer
list.
To override the printer, select the printer, and choose => from the pulldown
File Override Queue
menu. After overriding a printer, the original imported printer will have the symbol beside it in the
first column of the printer list.
After adding your printer(s), you can edit settings by selecting the printer from the printer list and
clicking the button. The tabbed window shown in Figure 7–6, Editing a Printer will appear.
Edit
The window contains the current values for the printer that you selected to edit. Make any changes,
in the main printconf window to save the changes and restart the printer
and click . Click
OK Apply
daemon.
Figure 7–6 Editing a Printer