Red Hat LINUX 7.2 Manual page 14

xiv
Figure 4 Installing Documentation Files
Scroll through the right side of the file manager screen and look for files beginning with the letters
"rhl" (as shown in Figure 4, Installing Documentation Files. There will be one file for each of our
four manuals. The file names contain the abbreviations IG, RG, CG, and GSG, corresponding to the
Installation, Reference, Customization, and Getting Started guides respectively.
Now, open a terminal by clicking on the
bottom of your desktop. Type the following at the command line:
cd su
Now press
[Enter]
and press [Enter]
rpm -ivh rhl-*.rpm
Press .
[Enter]
If you only want to install certain manuals, replace "rhl-*.rpm" with the full file name (as shown in
the right window of the file manager) of the manual that you want to install. For example, the file
name for the Official Red Hat Linux Getting Started Guide will look something like rhl-gsg-en-7.2-
5.noarch.rpm, so you would type the following to install the Official Red Hat Linux Getting Started
Guide on your computer:
. You will be asked for your root password. Enter the password at the command line
. You are now logged in as root. To install all four manuals, type the following:
Terminal Emulation Program
Introduction
button on the panel at the