Page 2
Installation Environment: Indoor use only. Avoid backlight, direct sunlight, and indirect sunlight. For Better recognition, there should be light source in or near the installation environment. The minimum bearing weight of the wall or other places should be 3 Close to Light Backlight Direct Sunlight Indirect Sunlight...
Page 3
Camera Camera Debugging Port 1 Camera Camera Debugging Port 1 IR Light IR Light Loudspeaker IR Light IR Light Touch Screen Loudspeaker Interface Debuggin Touch Screen Port 2 Fingerprint Interface Debugging Recognition Port 2 Area Fingerprint Recognition Power Interface Area Power Interface The figures are for reference only.
Page 4
Activation via Device After powering on, you will enter the activation page. Steps: 1. Create a password and confirm the password. 2. Tap Ac�vate to ac�vate the device. Characters containing admin and nimda are not supported to be set as activation password. We highly recommend you to create a strong password of your own choosing (using a minimum of 8 characters, including at least three kinds of following...
Safety Instruction Warning In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Do not connect several devices to one power adapter as adapter overload may cause over-heat or fire hazard. If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS...
Need help?
Do you have a question about the DS-K1A340 Series and is the answer not in the manual?
Questions and answers