Red Hat LINUX 7.1 - ISERIES Manual page 32

32
Figure 3–9 Partitioning with fdisk
Once you have chosen which drive to partition, you will be presented with the fdisk command screen.
If you do not know what command to use, type
When you are finished making partitions, type
back to the original fdisk screen where you can choose to partition another drive or continue with your
installation.
None of the changes you make take effect until you save them and exit fdisk
using the w command. You can quit fdisk at any time without saving changes
using the q command.
Chapter 3:Installing Red Hat Linux
at the prompt for help.
[m]
to save your changes and quit. You will be taken
[w]
Note