Package Contents 1 CS1768/CS1788 8-Port USB DVI KVM Switch with Rack Mounting Kit 2 Custom USB DVI-D KVM Cable Sets (CS1768) 2 Custom USB DVI-D Dual Link KVM Cable Sets (CS1788) 1 Firmware Upgrade Cable 1 Power Adapter 1 Foot Pad Set (4 pcs)
Page 3
• A VGA, SVGA, XGA, SXGA or multisync card. • Type A USB port • Microphone and speaker ports (optional) Note: The VGA monitor and VGA card are supported by the CS1768/CS1788, but are both optional. Cables • Only custom USB DVI KVM cable sets, which are specifi cally designed to work with this switch, may be used to link to the computers.
Page 4
Hardware Review Front View 1. Port Selection Pushbuttons 2. Port LEDs 3. Firmware Upgrade Recovery Switch 4. Audio Ports 5. USB 2.0 Hub 6. Reset Switch 7. Power LED Rear View 1. Power Jack 2. USB 2.0 Hub 3. Firmware Upgrade Port 4.
Two Monitors (1 x DVI; 1 x VGA) – plug your DVI monitor into the DVI console port, and plug your VGA monitor into the VGA console port. Note: The CS1768/CS1788 supports DVI, VGA, and dual interface monitors, but only one video signal (DVI or VGA) can be displayed at a time – the signal will display on either the DVI monitor or the VGA monitor, depending on the OSD settings.
Page 6
on the installation: Manual, an OSD (on-screen display) menu system, and Hotkeys. Manual Port Switching Use the front panel pushbutton switches to manually switch to a port. The on-screen display (OSD) is a mouse and keyboard enabled, menu driven method to handle computer control and switching operations.
North America: http://www.aten-usa.com/product_ registration Technical Phone Support International: 886-2-86926959 North America: 1-888-999-ATEN Ext: 4988 United Kingdom: 44-8-4481-58923 The following contains information that relates to China: All information, documentation, and specifi cations contained in this media are subject to change without prior notifi cation by the manufacturer.
Need help?
Do you have a question about the CS1768 and is the answer not in the manual?
Questions and answers