Page 1
Eolis WireFree™ io EN - Installation guide ES - Guía de instalación PT - Guia de instalação EL - Οδηγός εγκατάστασης io-homecontrol provides advanced and secure radio technology that is easy to install. ® io-homecontrol labelled products communicate with each other, improving comfort, ®...
Any use outside the sphere of application specified by Somfy is forbidden. This invalidates the warranty and discharges Somfy of all liability, as does any failure to comply with the instructions given herein. Never begin installing without first checking the compatibility of this product with the associated equipment and accessories.
Page 10
Figure E The motor must already be set and paired to a local io-homecontrol® control point. Press the PROG button on the Somfy io local control point for 2 seconds, until the application performs an up and down movement.
Page 11
To pair several motors or receivers with the sensor, repeat this procedure. To pair using an io-homecontrol® control point from a partner brand or a bi-directional Somfy io control point, please refer to the relevant guide. 5.3. Adjusting wind sensitivity threshold on the Eolis WireFree™...
Refit the trim piece on the wall bracket, positioning the Somfy logo so it is visible on the bottom and press the trim piece until its «clicks» correctly into place. 6.3. Fitting and mounting the sensor...
9. Tips and recommendations 9.1. Questions about the Eolis WireFree™ io Indicator Possible Solutions status causes Unpair at least one product The motor from the motor to be able to memory is full. The sensor connect the sensor. cannot be paired The sensor is not to the motor.
Page 15
« - «: the thresholds have been set by type of application from an Easy Sun io or a specific Somfy io bi-directional control point. To reset these thresholds and return to a single threshold,...
Page 16
Operating temperature: -20°C to +60°C Dimensions in mm (H x w x d): 216 x 95 x 95 Power supply: 2 AA (LR6) 1.5 V batteries Maximum number of connected Somfy io bi-directional control points: 3 Maximum number of connected motors: unlimited.
Need help?
Do you have a question about the Eolis WireFree io and is the answer not in the manual?
Questions and answers