Advertisement
Quick Links
Weather Station KNX
Weather Station KNX
Art. no.: 1870932
Operating instructions
1
Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
These instructions are an integral part of the product, and must remain with the end customer.
2
Device components
(1)
Sensor head
(2)
Grub screw for locking
(3)
Fastening arm
(4)
Global radiation sensor
(5)
Precipitation sensor
(6)
Light and twilight sensors
(7)
Mounting for fastening arm with bus connection
(8)
Air humidity sensor
(9)
Wind speed and wind direction sensor
(10)
Temperature sensor
(11)
Guide blade
(only if mounted on a mast)
82590128
5158881A
Figure 1: View
Figure 2: Underside view
1 / 8
16.02.2021
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for SOMFY 1870932
Summary of Contents for SOMFY 1870932
- Page 1 Weather Station KNX Weather Station KNX Art. no.: 1870932 Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible. Please read and follow manual fully. These instructions are an integral part of the product, and must remain with the end customer.
- Page 2 Weather Station KNX Function System information This device is a product of the KNX system and complies with the KNX directives. Detailed tech- nical knowledge obtained in KNX training courses is a prerequisite to proper understanding. The function of this device depends upon the software. Detailed information on loadable soft- ware and attainable functionality as well as the software itself can be obtained from the manu- facturer´s product database.
- Page 3 Weather Station KNX Figure 4: Avoid spray water Figure 5: Maximum load on the fastening arm Select a mounting selection in which the weather station is not influenced by local obstacles or shading, such as surrounding trees, chimneys, awnings, etc. The sensor must be able to detect wind, rain and ambient brightness without impedance.
- Page 4 Weather Station KNX ￭ Mount enclosed guide blade (11) in the fields provided next to the connection (7). If mounted on a mast without the guide blade, no correct wind direction measurement is possible due to the resulting turbulences. ￭ Route the power supply line through the mast.
-
Page 5: Technical Data
Weather Station KNX Black KNX– orange AC/DC 24 V ~/+ brown AC/DC 24 V ~/- The sensor head is translucent. Therefore, do not stick or write on the sensor head. Aligning the device Figure 9: Orienting the weather station ￭ Align the sensor head in the appropriate direction or - depending on the detailed on-site circumstances - according to the alignment of the facade (Figure 9). - Page 6 Weather Station KNX Cable type LiYCY 4xAWG26 Length connecting cable Total length per line 15 m Number of weather stations max. 3 (per line) KNX medium TP256 Commissioning mode S-mode Rated voltage KNX DC 21 ... 32 V SELV Current consumption KNX max.
- Page 7 Install with twisted pair cable. Commissioning is done with software (ETS). Somfy hereby declares that the radio equipment covered by these instructions is in compliance with the requirements of Radio Directive 2014/53/EU and the other essential requirements of the applicable European Directives. The full text of the EU declaration of conformity is available at www.somfy.com/ce.
- Page 8 Weather Station KNX We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling. Somfy Activités SA 70 Avenue du Nouveau Monde 74300 Cluses France www.somfy.com www.somfy.com/projects ©...
Need help?
Do you have a question about the 1870932 and is the answer not in the manual?
Questions and answers