Red Hat ENTERPRISE LINUX 4 - USING BINUTILS Using Instructions page 38

32
-e
encoding
-encoding=
encoding
Select the character encoding of the strings that are to be found. Possible values for
are: = single-7-bit-byte characters (ASCII, ISO 8859, etc., default),
s
acters, = 16-bit bigendian,
b
Useful for finding wide character strings.
-target=
bfdname
Specify an object code format other than your system's default format. Section 16.1 Target Se-
lection, for more information.
-v
-version
Print the program version number on the standard output and exit.
= 16-bit littleendian,
l
= single-8-bit-byte char-
S
= 32-bit bigendian,
B
Chapter 8. strings
encoding
= 32-bit littleendian.
L