Setting Up Specific Jobs - Red Hat CERTIFICATE SYSTEM 7.2 - ADMINISTRATION Administration Manual

Figure 18.1. General Settings Tab
3. Click the Enable Jobs Schedule checkbox to enable or disable the Job Scheduler.
Disabling the Job Scheduler turns off all the jobs.
4. Set the frequency which the scheduler checks for jobs in the Check Frequency field.
The frequency is how often the Job Scheduler daemon thread wakes up and calls the configured
jobs that meet the cron specification. By default, it is set to one minute.
NOTE
The window for entering this information may be too small to see the input. Drag the
corners of the Certificate Manager Console to enlarge the entire window.
5. Click Save.

18.3. Setting up Specific Jobs

Automated jobs can be configured through the Certificate Manager Console or by editing the
configuration file directory. It is recommended that these changes be made through the Certificate
Manager Console.
Setting up Specific Jobs
407