Setting Up Specific Jobs; Configuring Specific Jobs Using The Certificate Manager Console - Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION Admin Manual

Hide thumbs Also See for CERTIFICATE SYSTEM 8.0 - ADMINISTRATION:
Table of Contents

Advertisement

2. In the Configuration tab navigation tree, click Job Scheduler.
This opens the General Settings tab, which shows whether the Job Scheduler is currently
enabled.
3. Click the Enable Jobs Schedule checkbox to enable or disable the Job Scheduler.
Disabling the Job Scheduler turns off all the jobs.
4. Set the frequency which the scheduler checks for jobs in the Check Frequency field.
The frequency is how often the Job Scheduler daemon thread wakes up and calls the configured
jobs that meet the cron specification. By default, it is set to one minute.
NOTE
The window for entering this information may be too small to see the input. Drag the
corners of the Certificate Manager Console to enlarge the entire window.
5. Click Save.

11.3. Setting up Specific Jobs

Automated jobs can be configured through the Certificate Manager Console or by editing the
configuration file directory. It is recommended that these changes be made through the Certificate
Manager Console.
11.3.1. Configuring Specific Jobs Using the Certificate Manager
Console
To enable and configure an automated job using the Certificate Manager Console:
1. Open the Certificate Manager Console.
pkiconsole https://server.example.com:9445/ca
Setting up Specific Jobs
261

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CERTIFICATE SYSTEM 8.0 - ADMINISTRATION and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents