Crl Distribution Points Extension Default - Red Hat CERTIFICATE SYSTEM 7.2 - ADMINISTRATION Administration Manual

Parameter
Table 12.4. Basic Constraints Extension Default Configuration Parameters

12.7.4. CRL Distribution Points Extension Default

This default attaches the CRL Distribution Points extension to the certificate. This extension identifies
locations from which an application that is validating the certificate can obtain the CRL information to
verify the revocation status of the certificate.
For general information about this extension, see
The following constraints can be defined with this default:
• Extension Constraint; see
Section 12.8.6, "No
• No Constraints; see
This default defines up to five locations, with parameters for each location. The parameters are
marked with an n in the table to show with which location the parameter is associated.
Parameter
Critical
Type_n
Name_n
Reasons_n
Section A.3.5,
Section 12.8.3, "Extension
Constraint".
CRL Distribution Points Extension Default
"CRLDistributionPoints".
Constraint".
261