Authority Key Identifier Extension Default - Red Hat CERTIFICATE SYSTEM 7.2 - ADMINISTRATION Administration Manual

Parameter
Location_n
Enable_n
Table 12.3. Authority Info Access Extension Default Configuration Parameters

12.7.2. Authority Key Identifier Extension Default

This default attaches the Authority Key Identifier extension to the certificate. The extension identifies
the public key that corresponds to the private key used by a CA to sign certificates. This default has no
parameters. If used, this extension is included in the certificate with the public key information.
This default takes the following constraint:
Section 12.8.6, "No
• No Constraints; see
For general information about this extension, see
Authority Key Identifier Extension Default
Constraint".
Section A.3.2, "The authorityKeyIdentifier".
259