Red Hat CERTIFICATE SYSTEM 7.2 - ADMINISTRATION Administration Manual page 199

Parameter
op.enroll.tokenType.tks.conn
op.enroll.tokenType.auth.id
op.enroll.tokenType.auth.enable
Table 7.8. Enrollment Operation Preferences
Parameter
op.pinReset.tokenType.update.applet.emptyToken.enable
op.pinReset.tokenType.update.applet.enable
op.pinReset.tokenType.update.applet.requiredVersion
op.pinReset.tokenType.update.applet.directory
op.pinReset.tokenType.update.symmetricKeys.enable
op.pinReset.tokenType.update.symmetricKeys.requiredVersion
op.pinReset.tokenType.loginRequest.enable
op.pinReset.tokenType.pinReset.pin.minLen
op.pinReset.tokenType.pinReset.pin.maxRetries
op.pinReset.tokenType.pinReset.pin.maxLen
op.pinReset.tokenType.tks.conn
op.pinReset.tokenType.auth.id
op.pinReset.tokenType.auth.enable
Table 7.9. PIN Reset Operation Preferences
Parameter
op.format.tokenType.update.applet.emptyToken.enable
op.format.tokenType.update.applet.requiredVersionSpecifies if applet upgrade is turned on. The
TPS Configuration Parameters
Description
The TKS connection to use.
The LDAP authentication instance to use. The
default value is ldap1.
Specifies whether to authenticate the user
information. The valid values are true|false.
Description
Specifies whether TPS should upload an applet
to the token when it does not have one. The valid
values are true|false.
Specifies if applet upgrade is turned on. The
valid values are true|false.
The required key version.
The local filesystem directory where the applets
are located.
Specifies if the key changeover feature should
be enabled. The valid values are true|
false. When enabled, TPS checks to see
the key version sent by the token matches
symmetricKeys.requiredVersion.
The required key version.
Specifies if the login request should be
sent to the token. This parameter enables
authentication. The valid values are true|
false.
The minimum number of characters for the PIN.
The maximum number of times PIN
authentication can be attempted on the token
before the key is locked. This value is set on the
token when the PIN is reset.
The maximum number of characters for the PIN.
The TKS connection to use.
The LDAP authentication instance to use. The
default value is ldap1.
Specifies whether to authenticate the user
information. The valid values are true|false.
Description
Specifies whether TPS should upload an applet
to the token when it does not have one. The valid
values are true|false.
valid values are true|false.
179