AMX Modero NXA-WAP200G Instruction Manual page 30

Configuring the Communication
6. Select the AMX SSID from the list of Available Networks. AMX is the default SSID used by
the WAP200G.
7. Click the Configure button (from the right of the Wireless Network Connection page) to
open the Wireless network properties screen and setup the authentication of your wireless
card.
8. Click OK to accept these values and return to the Wireless Network Connection page.
9. Click OK. An on-screen popup (from the Wireless Network Connection icon in the taskbar)
then appears to notify you of the new changes and communication parameters.
10. From the taskbar, click Start > Settings > Control Panel (FIG. 17).
FIG. 19 Control Panel Navigation
11. Double-click the Network Connection (on XP) or Network and Dial-Up Connections icon.
To avoid confusion, it is recommended that you disable the Local Area Connection
(wired/Ethernet) by using your right mouse button and selecting Disable from the
options list.
12. Right click the Wireless Network Connection icon and select Properties from the popup
options list.
13. Select Internet Protocol (TCP/IP) from the Wireless Network Connection Properties screen.
14. Click Properties to open the Internet Protocol (TCP/IP) Properties screen (FIG. 20).
15. Click the Use the following IP address radio button (FIG. 20).
16. Enter any un-assigned IP Address into the IP Address field. The range must be from
192.168.1.1 ~ 192.168.1.XX (where XX is a value from 2 - 254, excluding 192.168.1.240
which is being used by the WAP) and enter the value of 255.255.255.0 in the Subnet Mask
field.
17. Click OK to return to the Wireless Network Connection Properties screen.
18. Click OK/Close to accept these changes and alter the IP Connection properties of the
computer.
24
By default, Microsoft configures your wireless radio and WAP for unsecured (open
network) communication.
If the WAP200G were later configured to use WEP keys; the user would then have to
return to the Wireless network properties screen and enter the encryption information
being used by the WAP200G.
NXA-WAP200G Wireless Access Point