Programming I!-Macroschedulerenginemod; Channels; Levels; Commands - AMX I!-MACROMANAGER Instruction Manual

i!-MacroExecuteMod requires the following touch panel pop-up page:
Popup Page
mmMacroBrowse

Programming i!-MacroSchedulerEngineMod

i!-MacroSchedulerEngineMod appears on the NetLinx bus as a NetLinx device. This device has 1
port with channels, levels, commands and strings like most other devices.

Channels

i!-MacroSchedulerEngineMod supports the following channels:
Channel
250

Levels

i!-MacroSchedulerEngineMod supports the following levels:
Channel Description
1-8
9
10
11
12
13
14
15
16
17
18

Commands

i!-MacroSchedulerEngineMod supports the following out-bound commands (master to device):
i!-MacroSchedulerEngineMod - Commands
Command
'SET EVENT-[Event Number],
[Event Name],[Date String],
[Start Time String],
[End Time String]'
'GET EVENT-[Event Number]'
'SET NAME-[Event Number],
[Event Name]'
'GET NAME-[Event Number]'
'SET STIME-[Event Number],
[Time String]'
i!-MacroManager
Popup Group
N/A
Description
Enable debugging
Unused
Total Event Slots
Available Slots
Next free Event index
Unused
Next Event to start
Next Event to stop
Total Events today
Events completed today
Number of current events
Events left today
Programming i!-MacroManager
Description
Set the name, date, start and end time of an event. All
parameters are optional.
Get the name, date, start and end time, next start and end
data and time for event.
Set the name of an event. If name is an empty string, event
will be deleted.
Get the name of an event.
Set start time for event number. If time string is empty, the
event is set for "No Start Time" (i.e. not scheduled)
13