Table of Contents
Advertisement
Programming i!-MacroManager
i!-MacroSchedulerEngineMod - Commands (Cont.)
'GET STIME-[Event Number]'
'SET ETIME-[Event Number],
[Time String]'
'GET ETIME-[Event Number]'
'SET DATE-[Event Number],
[Date String]'
'GET DATE-[Event Number]'
'SET SMACRO-[Event Number],
[Start Macro]'
'GET SMACRO-[Event Number]'
'SET EMACRO-[Event Number],
[End Macro]'
'GET EMACRO-[Event Number]'
'GET SNEXT-[Event Number]'
'GET ENEXT-[Event Number]'
'GET ELIST-[Start],[Count]'
'GET NLIST-[Start],[Count]'
'GET PLIST-[Start],[Count]'
'GET CLIST-[Start],[Count]'
'GET FLIST-[Start],[Count]'
'GET EVENT LISTS'
'RUN-[Event Number]'
'CANCEL-[Event Number]'
'DFORMAT-DAY/MONTH'
'DFORMAT-MONTH/DAY'
'TFORMAT-12 HOUR'
'TFORMAT-24 HOUR
'FBON'
'DEBUGON'
'DEBUGOF'
'RESET'
'VERSION'
Where:
[Event Name]
14
Get start time for event number.
Set end time for event number. If time string is empty, the
event is set for one-shot (non-time spanning) event.
Get end time for event number.
Get date for event number. If time string is empty, the event
is set for "No Date" (i.e. not scheduled)
Get date string for event number.
Set start macro for event number.
Get start macro for event number.
Set end macro for event number.
Get end macro for event number.
Gets next start Date and Time for event number.
Gets next end Date and Time for event number.
Get list of events from Start through Start+Count ordered by
name.
Get list of events from Start through Start+Count ordered by
number.
Get list of today's past events from Start through
Start+Count ordered by time.
Get list of today's current events from Start through
Start+Count ordered by time.
Get list of today's future events from Start through
Start+Count ordered by time.
Return past, current/active and future event lists.
Run event number and re-schedule the event (if it can be
rescheduled).
Cancel event from running today and re-schedule the event
(if it can be rescheduled)
Set Date format European format: Day/Month/Year
Set Date format US format: Month/Day/Year
Set Time format to 12 hour format: [01-12]:[00-59] [AM,PM]
Set Time format to 24 hour (military) format: [00-23]:[00-59]
Turn on unsolicited feedback. As today's event lists change,
they will be sent (see string section below).
Turn on debug.
Turn off debug. (Default)
Reset the schedule engine to re-schedule all events and
re-build the event list for today.
Send version information to master debug port (master
messaging)
Any ASCII Readable string of characters
i!-MacroManager
Advertisement
Table of Contents
