eufy Security EUFYCAM 2C Manual

GETTING STARTED

For HomeBase 2 installation

For eufyCam 2C installation

1. Camera quantity and accessories vary by bundle package.
2. HomeBase 2 power adapter varies by region.

PRODUCT OVERVIEW

HomeBase 2

1. Status LED
2. Speaker
3. Power port
4. USB port
5. Ethernet port
6. SYNC/ALARM OFF button
7. Reset button

eufyCam 2C

1. Lens
2. Light sensor
3. Microphone
4. Motion sensor
5. Spotlight
6. Status LED
7. SYNC button
8. Mounting hole
9. Charging port
10. Speaker

CONNECTING THE HOMEBASE 2

Connect the HomeBase 2 to the Internet

1. Power on the HomeBase 2, then use the ethernet cable provided to connect the HomeBase 2 to your home router.
   
2. The LED indicator turns blue (this may take up to 1min) when HomeBase 2 is ready for setup.
   

SETTING UP THE SYSTEM

Download the App and Set up the System

Download the Eufy Security app from the App Store (iOS devices)

or Google Play (Android devices).

Sign up for a Eufy Security account, then follow the onscreen instructions to complete the setup.

MOUNTING THE CAMERA

Find a Good Mounting Spot

To find a spot to mount eufyCam 2C, you need to test wireless signal strength.

1. Open the Eufy Security app, go to Camera Settings > Mounting Guide.
2. To test the wireless signal strength, take your camera and phone to the location where you want to mount the camera.
3. Move the camera as close to the HomeBase 2 as possible if the wireless.
   

Select Height and Location

Hang eufyCam 2C 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of eufyCam 2C. Avoid placing eufyCam 2C under direct sunlight.

Mount the camera

The camera can be mounted both indoors and outdoors.

1. Turn the knob of the mounting bracket clockwise to loosen and disassemble it.
   
2. Drill holes with a 15/64 inch (5.95mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.
   
3. Firmly screw the base of the mounting bracket onto the wall. Fasten the ball knob of the bracket to the base of the bracket.
   
4. Tighten eufyCam 2C to the mounting bracket and adjust the viewing angle by checking the live stream feed in the Eufy Security app.
   

Tips:

1. The Homebase 2 pairs up to 16 cameras, you can repeat the steps mentioned above to add more eufyCam 2C cameras to meet different needs of use.
2. For troubleshooting, check Help on the Eufy Security App. Refer to App page for LED indicator status.

CHARGING EUFYCAM 2C

Charge eufyCam 2C

Method 1

Method 2

Documents / Resources

References

• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download eufy Security EUFYCAM 2C Manual