eufy Security SoloCam C210, T8B00, 318T8B0012 Manual

AT A GLANCE

1. Camera Lens
2. Light Sensor
3. Microphone
4. Photosensitive Sensor
5. LED Indicator
6. Speaker
7. SYNC Button
8. USB-C Charging Port (with Sealing Cap)
9. Mounting Hole

CHARGING YOUR SOLOCAM

SETTING UP THE SYSTEM

1. Download and install the eufy Security app, then sign in or create an account.
   
   
   
2. Follow the in-app instructions to add the camera to the device list.

MOUNTING YOUR SOLOCAM

Select a Location
This camera can be mounted on a wall. Select a location where you can get the desired view. We recommend mounting the camera 7-10 ft (2-3 m) above the ground to achieve up to 26 ft of motion detection range.

Mount the Camera
This camera can be mounted both outdoors and indoors.

1. Loosen the cover of the mounting bracket by turning it counterclockwise and disassemble the mounting bracket.
   
2. For walls that are made out of hard materials, such as stucco, brick, or concrete, drill holes with a 15/64 inch (5.95mm) drill bit, then insert the anchors into the holes.
   • For soft surfaces such as wood, skip this step.
     
3. Firmly screw the base of the mount onto the wall. Reassemble the mounting bracket.
   
4. Screw the camera onto the mounting bracket. Position the camera to achieve the desired view, checking it using the live stream in the eufy Security app.
   

The SoloCam C210 can also be installed on the ceiling. Follow the steps above to install it. For troubleshooting, check Help on the eufy Security app. Refer to the app page for LED indicator status.

SAFETY

• The suitable temperature for devices and accessories is -20°C to 50°C (Charging temperature is 0°C to 40°C).
• Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature.
• Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments.
• It is recommended to supply the device in an environment with a temperature that ranges from 5°C to 25°C.
• When supplying power, place the device in an environment that has a normal room temperature and good ventilation.

THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED.
DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS.

• Replacing a battery with an incorrect type may bypass safeguards and create danger;
• Disposal of a battery in a fire or other source of significant heat, or by crushing, or cutting, may result in an explosion as well as leakage of flammable liquids and gases;
• Leaving a battery in an extremely hot environment may result in an explosion as well as leakage of flammable liquids and gases;
• A battery subjected to extremely low air pressure may result in an explosion as well as leakage of flammable liquids and gases.

CUSTOMER SERVICE

12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
( ⚥㕂 ) +86 400 0550 036
( 傈劤 ) 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
support@eufy.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok,
Kowloon, Hong Kong

@EufyOfficial
@EufyOfficial
@EufyOfficial