Summary of Contents for eufy Security eufyCam E330
Page 1
GUIDE E330 eufyCam (Professional) Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Page 2
AT A GLANCE S380 HomeBase ④ ① ② ⑤ ③ ⑥ ⑦ ⑧ ⑨ Model: T8030 ① Status LED ② Reset Hole ③ Speaker ④ Hard Drive Bracket ⑤ SYNC / ALARM OFF Button ⑥ USB Port 1 (Output: 5Vdc/2.4A) ⑦...
Page 3
INSTALLING YOUR STORAGE E330 eufyCam (Professional) DRIVE (Optional) ⑧ ⑨ ⑩ (For 4-Cam Kit) The S380 HomeBase comes with a pre- installed 1TB storage drive for storing video recordings. ④ (For 2-Cam Kit) You need to install a storage drive (not ⑤...
Page 4
2. Unscrew and take out the storage drive bracket. 4. Insert and screw the bracket back into the S380 HomeBase, then put the top lid back into place. 3. Fix your storage drive to the bracket with the included screws. Your additional storage drive must meet the following requirements: Type Hard disk drive (HDD) or solid-state drive (SSD) that...
1. Power on the S380 HomeBase and connect to your router using an 3. Download and install the eufy Security app, then sign in or create an Ethernet cable. Wait for up to 1 minute and the S380 HomeBase is now account.
⚠ Disconnect the camera from the power outlet before mounting. MOUNTING YOUR CAMERA We recommend mounting the camera 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the camera. Select a Location and a Height •...
Mount the Camera 2. Route the power cable into the waterproof case and connect it to the 1. Use the position template to drill holes with correct spacing, then power adaptor, then plug the adaptor into the power outlet. mount the camera using the provided screws. •...
Page 8
3. Adjust the camera angle and check the view using the live stream in 4. Fasten the cable to the wall using the included cable clips if needed. the eufy Security app. a. Loosen the knob, adjust the camera angle up or down, and then tighten the knob.
Page 9
SAFETY CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • The suitable temperature range for E330 eufyCam (Professional) and accessories is -20°C to 45°C (-4°F - 113°F). The suitable temperature range for S380 HomeBase ATTENTION! and accessories is -10°C to 45°C (14°F - 113°F).
Page 10
NOTICE NOTICE (Canada) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and NOTICE (United States of America) (2) this device must accept any interference, including interference that may cause FCC Statement undesired operation of the device."...
Need help?
Do you have a question about the eufyCam E330 and is the answer not in the manual?
Questions and answers