Sea gull lighting Chatham HC-426 Installation And Safety Instructions

Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fix-
ture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
FOR YOUR SAFETY
WARNING: BE SURE THE ELECTRICITY TO THE WIRES YOU
ARE WORKING ON IS SHUT OFF. EITHER THE FUSE REMOVED
OR THE CIRCUIT BREAKER OFF .
GENERAL
You don't need special tools to install this fixture. Be sure to follow the
steps in the order given. Under no circumstances should a fixture be
hung on house electrical wires, nor should a swag type fixture be
installed on a ceiling which contains a radiant type heating system.
Read instructions carefully. If you are unclear as to how to proceed,
consult a qualified electrician. NOTE: Proper wiring is essential
for the safe operation of this fixture.
CAUTION:
Fixtures with photo-cells should be mounted at least 48"
from all sides to avoid reflection of light back onto Photo-cell,
causing the Photo-cell to malfunction or flicker.
*NOT SUPPLIED
FIG. 1
FINIAL (A)
TOP
ASSEMBLY (E)
HOOD
ASSEMBLY (C)
CENTER
PIPE (B)
CAGE (D)
FITTER (F)
*POST
IF APPLICABLE: TO REMOVE THE PACKAGING
1. Remove the 3 retaining screws, and remove the cage.
2. Remove the cardboard packaging.
3. Replace cage and screws.
ASSEMBLY
Remove hood assembly from cage (D). STEP 1:
Install center pipe (B) into cage (D).
STEP 2:
NOTE FOR FIXTURES THAT ARE SOLID BRASS:
Your handcrafted, solid brass lighting fixture has been coated
with a durable, baked on acrylic lacquer which gives maximum
protection against the weather. In time, however, the brightness
of the brass will tarnish giving way to an authentic old world
brass finish.
NOTE: To keep your solid polished brass fixture looking new for
years to come, regularly apply a good quality non-abrasive car
wax to all metal surfaces, giving the fixture an extra
protective coating.
WARNING
NOTE: DO NOT INSTALL ON A POST OR A POLE THAT
RESULTS IN A VERTICAL RISE OF 25 FEET OR HIGHER.
HC-426
112311