Sea gull lighting HC-841 Installation And Safety Instructions

Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
IMPORTANT SAFETY INSTRUCTIONS
• Be sure the electricity to the system you are working on is turned
off; either the fuse removed or the circuit breaker set at off.
• Use of other manufacturers components will void warranty, listing
and create a potential safety hazard.
• You don't need special tools to install this fixture.
• Be sure to follow the steps in the order given.
• Read instructions carefully.
• If you are unclear as to how to proceed, contact a qualified
electrician.
• Proper wiring is essential for the safe operation of this fixture.
• Save these instructions.
FIGURE 1
BEFORE YOU BEGIN
Carefully remove the fixture from the carton and check that all parts
are included, as shown in figure 1 and 2. Be careful not to misplace
any of the screws or parts which are needed to install this fixture.
TOP CAGE (A)
RESULTS IN A VERTICAL RISE OF
CAP
NUTS (C)
IMPERFECTIONS IN THE GLASS
ADD TO THE AUTHENTICITY OF
FITTER (M)
*POST
*NOT SUPPLIED
WARNING
NOTE: DO NOT INSTALL ON
A POST OR A POLE THAT
25 FEET OR HIGHER.
NOTE: THIS GLASS IS
HANDCRAFTED, THE SLIGHT
THE FIXTURE.
HC-841
060304