Sea gull lighting HC-1178 Installation And Safety Instructions

Installation And Safety Instructions
Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to
this fixture. Fill in Item Number on Carton and File This Sheet For Future Reference. ITEM#_______________
IMPORTANT SAFETY INSTRUCTIONS
• Be sure the electricity to the system you are working on is turned
off; either the fuse removed or the circuit breaker set at off.
• Use of other manufacturers components will void warranty, listing
and create a potential safety hazard.
• If you are unclear as to how to proceed, contact a qualified electrician.
• You don't need special tools to install this fixture.
• Be sure to follow the steps in the order given.
• Proper wiring is essential for the safe operation of this fixture.
• To reduce the risk of fire, electric shock or personal injury, mount to
outlet box or supporting system able to support the weight of the
fixture.
• Read instructions carefully.
• Save these instructions.
*OUTLET BOX
(FIG. 1)
GREEN
GROUNDING
SCREW (G)
MOUNTING SCREWS (B)
*WIRE CONNECTOR
BEFORE YOU BEGIN
Carefully remove the fixture from the carton and check that all parts
are included, as shown in Figures 1 & 2. Be careful not to misplace
any of the screws or parts which are needed to install this fixture.
NOTE: This glass is handcrafted, the slight imperfections in
the glass add to the authenticity of the fixture.
GROUNDING & UNIVERSAL
MOUNTING BAR LOCK UP
*OUTLET
BOX
*WIRE CONNECTOR
FIGURE 2
GROUNDWIRE
CAP NUTS (D)
BACK
PLATE (C)
HC-1178
GREEN
GROUNDING
SCREW (G)
GROUND
WIRE
UNIVERSAL
MOUNTING
MOUNTING
SCREWS (B)
BAR (A)
*NOT SUPPLIED
RETAINING
SCREWS (E)
GLASS (F)
*NOT SUPPLIED
042712
*OUTLET
BOX
SCREWS