Dell
Status lights provide indications as follows:
Not lit: AC power is not connected.
Green: In standby mode, a green light indicates that a valid AC source is connected to the power supply and
that the power supply is operational. When the system is on, a green light also indicates that the power supply
is providing DC power to the system.
Amber: Indicates a problem with the power supply.
Alternating green and amber: When hot-adding a power supply, this indicates that the power supply is
mismatched with the other power supply (e.g., a high output 1100-W power supply and a 750-W power supply
are installed in the same system). Replace the power supply that has the flashing indicator with a power supply
that matches the capacity of the other installed power supply.
4.5 Side Views and Features
PowerEdge R510 Technical Guide
Figure 12. Redundant PSU
Figure 13. Left Side View
Figure 14. Right Side View
25