Sainlogic SA9 Quick Setup Manual

Sainlogic-SA9
Quick Setup Guide
Step 1：
Locate the battery door on the bottom of
the transmitter, remove the retaining screws on the
back of the sensor, remove the battery door, insert
3 new AA batteries and close the battery door.
Step 3:
1. Plug in the display console with the power adapter.2.
Remove the battery door on the back of the display
and install three AAA (alkaline or lithium)batteries.
If outdoor data is still not displayed, press and hold the
CHANNEL/+key for three seconds until a dash is
displayed.
Product Includes:
-Integrated outdoor transmitter
- Display Console
- Rain collector
- Wind Cups
- Wind Vane
- Mounting brackets and accessories
- Instruction manual
- Power Adapter
Recommended Tools:
- Precision screwdriver (for small Phillips
screws)
- Compass or GPS (for wind direction
calibration)
- Adjustable wrenc
Step 2:
After installing the batteries, the Integrated
Outdoor Sensor LED will illuminate for 3
seconds and then blink every 16 seconds. If it
does not flash, press the reset button.
Referring to the instructions on the
following page.
Learn how to make the display connect to
WiFi and how to download the
Weatherseed APP and register to log in.
- 1 -
h