Pairing - Plantronics EXPLORER 220 BLACK User Manual

PAIRING

This headset comes with QuickPair
Bluetooth phone is even easier. Follow the instructions below to pair your
phone with your headset for the first time.
QUICKPAIR FEATURE INSTRUCTIONS
SETTINGS
SETTINGS
Time and Date
Phone Settings
Bluetooth
Sound Settings
Network Services
Security
Reset Settings
Step One:
Prepare Phone—
Turn on Bluetooth
For most phones, go
to Settings/Tools menu
and select Bluetooth or
Connectivity and select
"On." (Or see the user
guide for your phone.)
NOTE: Normally you only need to pair the headset and handset once. If
headset has been previously paired with another device, follow pairing
instructions on the next page.

technology so pairing with your
TM
BLUETOOTH
Discover/
Search
Step Two:
Prepare Headset—
Pairing Mode
Begin with headset
turned off. Turn
headset on (hold call
control button for four
seconds until the light
flashes blue) and it will
automatically go into
pairing mode, flashing
red and blue.
BLUETOOTH
220Plantronics
Step Three:
Pairing—
Headset Passkey
Add Headset to Phone
For most phones,
go to Settings/Tools
> Bluetooth > Search
or Add a Device, then
Select "220Plantronics."
For passkey enter
0000. Headset will
flash blue when paired
successfully. It is now
powered on and ready
to use.
PASSKEY
0000